Saver Safety Products

• Aluminised Hood, Heat Resistant
• Anti Fog Filter
• Silica gel breathing mouth
• Vent Value
• Lace Fitting
• Filter
• Fire Resistant Neck Tighten

• Open the package, taking out the vacuum bag.
• Tear off the vacuum package bag, take out the two plug on the front and back of the jar.
• Put on head cover, fasten the belt.
• Following up the Exit guide to escape.

• Ergonomic design and light weight
• Suitable for profession laundry Consistent ESD property

• Excellent choice for semiconductor, Hard Disk Drive, Pharmaceutical and Food industries.
• Recommended in areas where ESD and cleanliness are to be maintained.

• Emergency eye/face wash fountain operates independently by push lever and foot paddle
• Pipe : ISI marked GI pipe with powder coating for anti-corrosion
• Valve : SS stay open ball valve with yellow ABS push plate
• Bowl : Receptor bowl made of ABS and highly resistant to acid, alkali and oil among others.
• Atomizer heads : Twin soft flow atomizer head which has aerators to control the stream straightness and diameter, thus reducing splash by aerating the stream. It also controls to save water and reduce energy costs. The twin flow has cover which protects from dust and opens with water pressure.
• Activation: Push plate and foot paddle
• Water inlet and drain: 1/2 inches BSP inlet and 1¼ inches BSP drain
• Standard: IS: 10592:1982

• Eye Wash (Wall Mounted) GI-ABS & SS
• Eye Wash (Wall Mounted) SS-304
• Emergency Eye Face Wash Fountain (Hand Operated/Foot Operated) SS 304
• Emergency Eye Face Wash Fountain (Hand Operated/Foot Operated) GI
• Pipe & Fittng are SS &Stainless Steel Valve & Spares are of ABS material ( Bowl & Nozzle )

• Abrasion Resistant
• Anti Static
• Cushionong Effect
• DVP Nitrile rubber Construction
• European Standard Steel Toecap
• Genuine Leather
• Odour Free
• Oil and Acid Resistant
• Sweat Absorption

• Composite Toe Cap
• Steel Plate
• Water Resistant German DIN Leather

• Mining and Petroleum
• Power
• Semiconductor and Electronic

• Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. Never use caustic or corrosive cleaning agents.
• When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.
• To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.
• The shoe should be used for the purpose for which it has been designed.

• Most of the muscles are in your feet. Thus you should wear comfortable shoes.
• The body temperature is regulated through your feet
• Maximum number of nerves go through your feet.

• Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.
• Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.
• Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.
• Cushioned Insoles providing better comfort.
• Shock absorbing PU midsole with low density providing uniform cushioning and comfort.
• Light Weight PU for a featherlite feel even during high stress working conditions.

• Bowl: ABS
• Eye wash nozzles : ABS
• Push Plate: GI

Wall mounted Whower Hand Operated GI:

• Pipe & Fittng are SS &Stainless Steel Valve &Spares are of ABS material ( Bowl, Nozzle & Shower )

• V-4400 series of respirators includes Venus V4400,V44++,V44+ & Dhul Rakshak V404 respirators
• These filtering face piece respirators are of fold flat design having C Style & V Style.
• V-4400 series of respirators has superior micro fine filter media technology which protects against respirable suspended particulate matter. These respirators consist of multiple layers viz pre-filter, fine filter and skin comfort layer.
• V-4400 series of respirators have unique fit adjustors which provide optimum fit & comfort. They also have dotted pattern edges for soft feel.
• V-4400 series of respirators has latex free knitted textile elastic which has a long life, is skin friendly and does not deform in high temperature.
• These series of respirators have headstrap stapled outside filter media which avoids puncture in filter area and is leakproof.
• V-4400 series of respirators have noseclip which is embedded inside the mask and the respirator has no metal exposure or loose parts. 

• Venus V4400 respirator meets the requirement of NIOSH N95, EN 149:2001+A1:2009 & ISI 9473.
• V44++,V44+ & Dhul Rakshak V404 respirators meets the requirement of IS 9473.
• These respirators should be used to protect the wearer from solid and non-volatile liquid particles.
• Particulate filter respirators are classified by filtering efficiency and maximum total inward leakage performance & also by inhalation resistance.
• These respirators can be used to protect against mechanically generated particulates such as those generated from sanding, grinding, drilling, sweeping etc. these respirators have filters that can help reduce breathing in pathogenic biological airborne particulates such as influenza virus.

• V4400 respirator has been evaluated in the laboratory and found to comply with all of the requirements of Title 42, Code of Federal Regulations, Part 84 for NIOSH certification.
• V4400, V44++,V44+ & Dhul Rakshak V404 respirators have been produced to comply with the requirement of the Indian standard Institute IS14746:1999 under an agreed production certification scheme operated during manufacture in accordance with the Bureau of Indian Standards.
• V4400 respirator has been produced to comply with the requirement of EN 149:2001+A1:2009 under an agreed product certification scheme operated in accordance with IFA in Germany.

• Intrinsic Safety (Ex-Ia) suitable for use in Gas Group, I, IIA, IIB, IIC area  as per IS/IEC 60079-11:2006

• The Battery and Lamp should be replaced in safe area only.
• Refer Operational manual before use.

• Car Charger
• Head Band
• Clip

Features:

• Emergency Use Authorization for Healthcare Professionals
• NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particles
• Two-strap design with welded dual point attachment helps provide a secure seal
• Cushioning nose foam
• Lightweight construction promotes greater worker acceptance and may help increase wear time
• Lightweight construction promotes greater worker acceptance and may help increase wear time
• Advanced electrostatic media is designed for ease of breathing

During the public health emergency of the COVID-19 pandemic, these standard N95 “industrial” respirators may be used by healthcare professionals according to the U.S. FDA’s Emergency Use Authorization (EUA). 3M Particulate Respirator 8210 is not cleared by the U.S. FDA as a surgical mask, as a surgical mask and is not considered fluid resistant, therefore a face shield must be worn during use.

3M 8210 Particulate Respirator Mask is a disposable particulate respirator that is designed to help provide reliable respiratory protection of at least 95 percent filtration efficiency against certain non-oil based particles. This respirator is designed for use for particles such as those from grinding, sanding, sweeping, sawing, bagging, or other dusty operations. This respirator can also help reduce inhalation exposures to certain airborne biological particles (examples: mold, Bacillus anthracis, Mycobacterium tuberculosis), but cannot eliminate the risk of contracting infection, illness, or disease. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media designed for ease of breathing. This respirator is compatible with a variety of protective eyewear and hearing protection.
This particulate respirator is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain non-oil based particles and provides at least 95 percent filter efficiency.

Breathing hazardous particles can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Particulate Respirator 8210, which is designed to help reduce exposure to certain airborne particles.

Warning:
These respirators help reduce exposures to certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For proper use, see package instructions, supervisor, or call 3M OH&ESD Technical Service in USA at 1-800-243-4630 and in Canada at 1-800-267-4414.

• Non-Woven Fabric + Meltblown Fabric
• Certification: CE, FDA
• Anti Bacterial
• Dust Proof
• The Exhaust Gas

• Explosion proof as per EX-standards
• 100% waterproof, dustproof and airtight
• Made of non-conductive plastic
• Rubberized read switch for single-handedoperation
• Adjustable rubber/ neoprene strap
• Rubberized lamp head with adjustablebeam angle
• Light flux is approx. 120 lumens from a 3 Wcree LED lamp
• Supplied in blister packaging including thebatteries
• Duration of light: approx. 12 hours at fullpower and total of 45 hours (approx.)

• Built Pelican tough
• Hands-free design
• Comfortable Cloth Strap
• Safety Certified Class I, Division I

Specification:

• Body Material: SS 304, ISI Marked
• Top & bottom would be made of thickness 16 gauge of SS304.
• The entire piping, shower head, atomizer unit, push plate would be of SS304..
• The front door is of SS 304 doors having glass window fitted with rubber tubing for better safety purpose.
• The two sides will have mesh design at the top for better ventilation purpose.
• The internal cabinet will have hanger arrangement.
• The bottom will have drain type arrangement wherein the water will have will be collected & drained.

We are the leading supplier of this products. Safety Shower and eyewash operates independently by pull rod, hand push lever and foot lever.

Other Detail:

• Shower : Extra large drench shower head made of highly visible yellow ABS plastics
• Pipe : ISI marked GI pipe with powder coating for anti-corrosion
• Valve : SS stay open ball valve with yellow ABS push plate
• Bowl : Receptor bowl made of ABS and highly resistant to acid, alkali and oil among others.
• Automiser heads : Twin soft flow automiser head which has aerators to control the stream straightness and diameter, thus reducing splash by aerating the stream. It also controls to save water and reduce energy costs. The twin flow has cover which protects from dust and opens with water pressure
• Activation: For shower - Pull rod; For eyewash– Push plate/ Foot paddle
• Water inlet and drain : 1-1/4 inches BSP

•  Jacket & Trouser En 469
•  Balaclava Hood En 13911
•  Fireman Helmet En 16473
•  Fire Fighting Gloves En 659
•  Fire Fighting Boots En 15090:2006

• Outer Shell: 6.0oz Nomex Iii A Fabric.
• Moisture Barrier: Aramid/kevlar Non Woven Laminated With Ptfe Membrane For Maximum Breathability And Hydrostatic Head (Waterproof) Performance.(En 343 Protection Against Foul Weather)
• Thermal Barrier: Constructed Using Non-woven Aramide Kevlar Fibres Laminated With Nomex/viscose Innermost Ling Fabric For Maximum Protection;
• Reflective Tape: 2"Width Yellow-silver-yellow Reflective Trims Installed At Arm And Legs, Front, Back And Bottom On The Jacket And Pants To Enhance High Visibility Of Workers;
• Fireman Helmet Specification
• Standard: Ce En 16473
• Performance: Flame-retardant Shell / Interior Basket / Chin Strap; Puncture Resist;
• Retractable Pc Face Protector; Neck Protection, Reflective And
• Luminescent Stripes, Adjusting Head, Possible Wearing Of The
• Protective Mask Under Visor; Easy To Operate And Spare Parts Available

Product Description:

• Alcoscan AL6000 is a hand held, portable breath alcohol tester to check subject's breath alcohol concentration with reliable accuracy and it is available to test in Passive mode.

• Certificate : CE, FDA 510K listed, DOT, Australian Standard
• Color Text : Silver, Red
• Contains : 1x Breathalyzer
• 2x AA size Alkaline Batteries
• 5x Mouthpiece
• 1x Pouch
• 1x Hand strap
• 1x Manual